Wireless interactive HH9000 Series Bedienungsanleitung PDF herunterladen (Seite 16)

System Clock: Clicking TIME SYNC will synchronize the camera’s time with the current computer time.

【NTP Parameter】：Input the correct NTP server address and select the correct time zone. After saving,

switch to 【Real-time Image】. The NTP sever will show the correct system time.

【System Information】Displays device name, device number and user-defined device name.

Note：Renaming the device name and saving it, will restart the device.

【Upgrade】Click 【Browse】button, and then select the correct file for upgrading. Click 【Upgrade】

to upgrade. After completion, the IP camera will reboot automatically.

Example Only

：The current version of the IP Camera is V6.0.0.1; The new version of the IP

Camera from the factory is V6.0.0.5(file: hh5200.ccd.6005.uke) . Click the【Browse】button，

select file:hh5200.ccd.6005.uke，and click【Upgrade】button. When the upgrade is complete, it

will display “upgrade successful”, and the IP camera will restart. Login and verify the new

version firmware.

Note：

Always upgrade firmware in sequence

Allow firmware to upgrade completely. Do not recycle power or interrupt network.

【Image Storage Path Setting】Setting storage path for image file and captured image file. Default

path: C:\XDNVS

【Restore default】Will restore all parameters to factory default.

【Reboot】The IP Camera will restart after 5 seconds.

4.4 IP Camera Video Settings

IP Camera video settings as follows:

CCD Interface

【Image Resolution】: Set image resolution, CCD Camera supports PAL system D1 (704*576)/

HD1 (704*288) /CIF (352*288)/QCIF (176*144); NTSC system D1 (704*480)/HD1

(704*240)/CIF(352*240)/QCIF (176*120)

【Image Quality】: Options for Best, Good, Normal, and advanced image settings.

16/ 30

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Keine Kommentare

Wireless interactive HH9000 Series Bedienungsanleitung Seite 16